Wii-clip Version 5B for Wasabi
WE ARE ORIGINAL RESELLER FOR THE WII-CLIP
Once you have got your wii opened and have removed your dvd drive, the clip can then be installed in under 1 minutes.
Its Very easy to install. You just need to solder the chip to the 1:1 points.
Then carefully push it over the D2C chipset on the drive, Please make sure you have the clip aligned with your drives chip before you push the chip into place , if it is not aligned properly you can damage the clip and damage the small components around it .
You don't need the extra wires for 3V and GND , 1 wire is needed to join the two f points !
Very easy to disable the WII chip, just remove (pull out) the Wii-clip from the Wii's motherboard, no need to unsolder anymore.
This process will allow you return your WII to its stock configuration, it can give back you one 100% original WII immediately.
|
